|
|
Specifications:
- 10 feet of vacuum hose
- Our exclusive “snap-lock ” quick hose connector between the pump and the bag
- A generous sized, 36” x 54 ”, 20 mil vinyl bag with electronically welded seams and our exclusive three track, “E-Z” zip closure system and our electronically welded, air tight hose valve
- Vacuum gauge
- Illustrated operators manual
- Other bag sizes available
|
The Most Economical & Versatile Start-up Systems
The CD-1001 is the perfect systems for the amateur/ hobbyist or professional who wants to experience the fun, economy, and speed of doing their own veneering, forming, and laminating, without the expense of the larger professional systems or who don’t want the bother of using an air compressor with an air powered pump to create the necessary vacuum. These systems allow you to make those curved pieces that you’ve always wanted but couldn’t do, and lay-up those exotic or specially matched veneers that need the “professionals” touch for a perfect job. |
|
|
Specifications:
- 6.5 CFM
- 27.5" Hg Vacuum Level
- 37 LBS
- Powder Coated Steel Case With Two Stainless Handles
- All Controls And Vacuum Port Front Mounted
- In-line Cleanable Vacuum Filter
- Electronic Check Valve
- Vacuum Hose
|
The MARK 6.0 Vacuum Pump uses the new, American made, rocking piston vacuum pump, weighs about 10 lbs less than a system using a rotary vane, is much quieter, and produces a higher vacuum level. This system also uses an electronic valve which is superior in many ways to the old mechanical valves. Add a 20 mil, 54”x109”, polyurethane vac bag and you have the best of the best. |
|
|
Specifications:
- Dimensions: 10” x 10” x 22”
- Shipping wt.: 78 lbs
- 10 cfm, 3⁄4 hp, 120 vac
- 24”-26” vacuum level
- Thermal overload protection
- Quick disconnect vac hose
- Multi bag operation with optional manifold
- Power coated steel case
|
The PRO X is
the heavy duty work horse especially for those shops where
lamination and forming is part of everyday production. Packaged
with the MARK X, 10 cfm automatic pump, 54” x 109”
polyurethane vac bag, vac hose, and manual, the PRO X is “The
priced right” step–up system for the production
shop. |
|
 Pro 12 System shown with optional manifold
|
Specifications:
- Dimensions:25"long x 17"wide x 22"high (not including handle)
- Shipping wt: 78 lbs
- 5 cfm, 1/3 hp 120 vac
- Dry, rotary vane vacuum pump
- Thermal overload protection
- 10 amp circuit breaker
- Multi bag use with optional manifold
- Quick disconnect vacuum hose
- 54" x 109" poly vacuum bag
|
The Pro 12 is the affordable"step-up" for those busy shops that do a lot of veneering and forming. The extra evacuation speed created by the 12 gallon reserve tank significantly reduces the time needed to draw down a vacuum bag plus, it easily allows multiple bag operation without significant reduction in evacuation time with the optional manifold. The "roll around" feature is especially important when moving the pump to different locations in the shop or job site. |
|
 Pro 20 System shown with optional manifold
|
Specifications:
- Dimensions: 30" long 27" high 19" wide (not including handle)
- Shipping wt: 135 lbs
- 10 cfm, 3/4 hp 120 vac , dry rotary vane vacuum pump
- Thermal overload protection
- 10 amp circuit breaker
- Multi function operation with optional manifold
- Quick disconnect vacuum bag
- 54" x 109" poly vacuum bag
|
The Pro 20 is the big brother to the Pro 12 and is the final word in production speed. Shown here with the optional, 3 port manifold it brings production to a new level. Coupled with a 10 cfm, dry rotary vane vacuum pump and, mounted on a 20 gallon, ASME certified holding tank it is the fastest portable vacuum veneering/forming system available |
|
|
|
