Individual Pumps

CD-100, MARK 6.0 , MARK X, SERIES XII, SERIES XX

The MARK X and MARK 6.0 are electronically regulated, completely self contained, rotary vane vacuum pumps. They do not require an air compressor to create a vacuum. These pumps have been especially modified to match them perfectly with the vacuum bag veneering, forming and clamping applications. The system is controlled by an illuminated, three position switch giving the operator the choice of having the vacuum flow continuous for clamping or cycled through the adjustable vacuum level switch for bagging. The purpose of the cycled or bagging mode is to turn off the pump once it has reached a pre-set level, in this case all our switches are pre-set to 25"Hg, and to re-start it when the vacuum level falls. This cycling mode keeps the bag at full vacuum but doesn't allow the pump to overheat and activate the electronic, thermal relay switch that is built into each rotary vane pump as an extra protection. When using the clamping mode the pump will automatically bypass the micro switch and reach its maximum vacuum of between 26" to 27" Hg.

	CD100 Vacuum Pump Specifications:		$249.00 Qty
	Continuous Duty Diaphragm Type, no controller required 25"Hg. 5-.7 CFM 100.10 volts, 50/60 Hz	1/16 Hp. Vacuum gauge Shipping Wt., 6 Lbs

	MARK 6.0 Specifications:		$695 Qty
	6.5 CFM 27.5" Hg Vacuum Level 37 LBS Powder Coated Steel Case With Two Stainless Handles All Controls And Vacuum Port Front Mounted In-line Cleanable Vacuum Filter Vacuum Hose Electronic Check Valve	The MARK 6.0 Vacuum Pump uses the new, American made, rocking piston vacuum pump. This pump weighs about 10 lbs less than a system using a rotary vane, is much quieter, produces a higher vacuum level of 27"hg and is significantly faster at about 6.5 cfm. This system has also done away with the mechanical check valve that was prone to clogging and would cause the pump to cycle rapidly. Instead, we use an electronic valve which doesn't depend on springs and "o" rings to prevent leakage. All this is more costly but it makes for a much better and trouble free product.

	MARK X Specifications:		$985.00 Qty
	16 gauge line cord with grounded plug Replaceable Fused circuit protection Our exclusive, "snap-lock" hose connector on the front of the chassis for easy access 10" high X 10" wide X 22" long All USA manufactured	3/4 Hp 100/115, 220/240, 50/60 Hz, single phase 10 CFM open flow

	SERIES XII Specifications:		$1095.00 Qty
	5 CFM dry vane type Fully automatic electric pump mounted on 12 gallon ASME certified “roll around” tank

	SERIES XX Specifications:		$1495.00 Qty
	10 CFM dry vane type Fully automatic electric pump mounted on 20 gallon ASME certified “roll around” tank